inflatable PVC manufacturer today: Polyester fibers are measured by yarn weight (denier) and weave density (number of threads per inch) or count. The heavier the weight, the higher the denier. The 9×9 scrim has 9 strands per inch and 9 strands per inch. The first number is the number of threads in the longitudinal (or warp) direction, and the second number is the number of threads in the transverse (or weft) direction. Vinyl is measured by its thickness (l mil is 1000 inches). Vinyl is treated to have certain properties such as flame retardant, antibacterial, antistatic and UV resistant. Find more information on pvc tarpaulin.
SPC floor, Stone Plastic Composite, is a hard plastic floor, which can also be bent, but compared with LVT floor, the curvature is much less. Its common name is stone crystal floor, which is called stone-plastic floor or plastic stone floor in Hong Kong and Taiwan. Except for Europe and the United States, Southeast Asia is one of the regions where SPC floor is used most, because it not only has high appearance value, but also has excellent waterproof and moisture-proof performance , lower cost than laying floor tiles, and saves laying time.
In terms of hardness / softness, no matter the colored film or transparent film, the hardness / softness degree must reach the semi-rigid level, and the hardness / softness degree must be controlled between 20PHR and 35PHR. The specific hardness / softness degree needs to be related to the specific products produced. Colorful PVC film can make stationery products more beautiful and provide suitable colors for users who like different colors better. When choosing color PVC film, must pay attention to the film of calcium powder content, must choose low calcium powder content of PVC film, because of the high calcium powder content, the physical properties of PVC film and flexibility are the worse, and the hardness of film is lower, the PVC film is easy to appear white spots and white stripe after the folded , if PVC film thickness is thin, it is easy to appear problem such as hole.
As a professional manufacturer of PVC tarpaulin and PVC film, Lin-Yang has a large workshop covering an area of over 33,333? for making PVC tarpaulin. PVC tarpaulin is the polyester fabric with PVC glue which is smooth and 100% waterproof. Our PVC tarpaulin can be provided with various specifications to meet different customers’ needs. The width can be available from 40 to 260 inches, the thickness ranges from 0.2mm to 5mm, and the softness can be made from 18PHR to 78PHR.
ABS is the main material of the plug-in building blocks, and the three letters represent the three substances of “acrylonitrile, butadiene and styrene” respectively. The main reason for using ABS for building blocks is that its dimensional stability is good, and the toys made can keep the size and height consistent. At the same time, ABS has high hardness and toughness, and will not become brittle even at low temperature (low temperature resistance -40°). And wear-resistant. In general, ABS is non-toxic and harmless, resistant to high temperature, low temperature and corrosion, but it does not mean that it can be scalded with boiling water.
PVC bag production process: Currently, there are many factory choosing use PVC Film to mass-produce the pvc bag. Like in China, Vietnam, Philippines these labor-intensive countries. They are highly appreciated the benefits of this bag. This plastic make the printing process can work easily. We can screen-print with tightly seal with gold and silver foil in PVC bags. PVC bag production process takes place in a cosmetic bag factory. There are 2 ways: Hot pressing and high-frequency hot press sewing. The production process of PVC bag by high-frequency hot press machine.
Non-toxic and non-polluting: The raw materials are specially refined to remove toxic substances, no heavy metals are used as stabilizers, and there is no pollution to the environment. Scratch and wear resistance: The surface of the film is scratched with a fingernail without leaving any traces. The surface color is often scrubbed, and it does not change or fade. No chromatic aberration, no discoloration: the same product is supplied every time, the color, surface effect and pattern are the same. Molded door panels will not discolor after 20 years of indoor use. See even more information on linyangpvc.com.
Since 2002, Lin-Yang has been specialized in manufacturing PVC film and PVC tarpaulin. These high-quality products give the company a competitive edge on the market and made us be the one of best PVC film manufacturers. With strong economic strength, we have imported advanced equipment for achieving the full-automatic operation in the process of batching, mixture, stirring, hot melt processing, calendaring and so on, so that each product can be produced with high quality and excellent performance. All products are manufactured in strict accordance with EU EN71-3, RoHS, PAHs, REACH, USA ASTM-963, and HR4040 standards, and environmental protection standard.