Top quality light gray gallon and rust remover online store

High quality concrete coating & rust remover online shopping right now? Farm, industrial, marine commercial, and construction industries all use POR-15 Rust Preventive Coating to protect expensive and valuable equipment against rust, abrasion, and even graffiti. POR-15 Rust Preventive Coating also has excellent “surface tolerance”, which means it works very well on porous surfaces, such as wood, fiberglass, concrete, and bricks. Try some for yourself!

I was prepared for this to be a messy process with difficult cleanup. It was the exact opposite. In fact, I wish I had poured out less of the product into my disposable dish, because I needed to brush on so little. It’s the consistency of water and brushes on just like water. My next step was several coats of the spray paint, which was also very easy. The hardest part was finding things from which I could suspend the items I was painting.

POR-15 Rust Remover will safely remove light to even heavy rust completely from metal surfaces and will not affect plastic, PVC, Viton, or most paints. One gallon derusts several hundred pounds of heavily rusted steel, this equates to around 1/2 to 3/4 pounds of dry rust removed per gallon. Rust Remover will not harm unrusted steel and is safe on other metals. Rust Remover has no fumes or bad odors and no VOCs. No sanding or scrubbing required. POR-15 Rust Remover works in as little as 20 minutes for light rust or overnight for heavy rusted metal. All of the rusted areas must be submerged in the Rust Remover for it to work. When all of the rust has been removed, rinse the metal pieces with water. POR-15 Rust Remover works in as little as 20 minutes for light rust or overnight for heavy rusted metal. For best results use POR-15 Cleaner Degreaser to clean parts before using POR-15 Rust Remover. Read additional details at rust remover.

I did a lot of researching looking for the best caliper paint for my 2002 Jaguar XKR calipers including POR-15, G2, VHT, Duplicolor, and BCS Automotive (UK). G2 was eliminated since once opened you need to use it since you had to add the 2 components together before using, BCS sounded awesome but not available here in the US. I eventually chose POR-15 (Red) and the results are just fantastic. My XKR is silver with the Red Center Caps and the red calipers just really pop. I could not be happier. I have read some complaints about the results but if you follow their Ste-by-Step instructions you will not be disappointed. Its a fair amount of time to do the job right but worth the effort IMO.

We make a product called ‘Metal-Ready’. It’s a rust remover that leaves a zinc phosphate coating on base metal, the perfect preprimer for POR-15. NOTE: New steel is coated with a protective oil finish at the mill. This finish must be removed before using POR-15 or Metal-Ready. Clean metal first with POR-15 Marine-Clean, then rinse with water and dry. Silver contains metal filler and should be used in badly rusted, pitted areas. It will fill in holes better than black or clear. Black is generally used on frames, underside of fenders, etc. because that’s the usual color there. Clear renders the smoothest finish and is often used as a preprimer on exterior surfaces; Gray is great on concrete floors, bilges, storage areas, as well as steel as desired. Read more details at por15.com.