Metric cable gland and PG threaded cable glands buying advices? Our watertight fittings for the rail sector – the WADI-BN fittings – are for the entry of electric cables inside railway compartments and between carriages, in air-conditioning systems, in traction motor engineering and in signal boxes. As in all industries, the WADI-BN must also meet extensive safety standards in order, for instance, to prevent cable fires. The most important of these are the requirements of the global players in the train industry, stipulated in the DIN EN 45545 and NF F 16-601 standards, among others.
There’s a world of choices out there and unfortunately no one-size-fits-all option. But it does mean that you can custom select a cable gland based on your parameters. And to do that, you first need to consider a range of environmental and application factors. It doesn’t matter whether you’re working in aerospace, industrial, marine, power and utility, telecommunications or any other key industry. What’s important is identifying the core application environment of your cable gland.
Pg thread form of a German conduit pipe thread (DIN 40430) Unit: mm The screw thread referred to as a Pg 13.5 is a German DIN standard 40430 conduit pipe thread type. The thread angle is an 80 ° included angle and is similar to the JIS standard JIS C 8305 for thin steel conduit threads. Common applications for cable glands include aerospace, cleanroom, fire protection, industrial, marine, panel or enclosure, power or utility, railway, and telecommunications. Fire protection glands : Designed and rated for prevention of fire propagation across the bulkhead or barrier. See more info on PG Cable Gland.
The CMP E1FX/M cable gland is suitable for use with all forms of equipment protection permitted in Zone 1 provided always that the prevailing code of practice, installation and maintenance is observed ie. IEC60079-14. Locate the cable gland Armour Cone ensuring the correct side of the cone is outermost – grooved for braid/tape armour and stepped for SWA cables. Pass the cable through the cable gland until the wire armour is engaged with the cone. Spread the wire armour evenly around the cone.
Gable Gland Sizing: Cable gland size tables are provided below for general guidance, however reference should be made to the relevant British Standard or gland supplier. Metric Thread Example: If your instrument, or cable enclosure has a metric thread then using the chart below you can see that if you have a cable with 4 cores, with a nominal area of 4mm2 then an M20 cable-gland should be used.
CableGlandsOnline.com offer a wide selection of cable glands and cable ties to fit your needs. All of our cable glands meet IP68 specifications as liquid tight and are resistant to low level acides and alkalis. These cable glands are also designed for install well. Here are you can find a full sizes of all kinds of cable glands. Whether your application requires metric, npt or pg or other applications. You will find what you need here. Source: https://cableglandsonline.com/.