Searching to purchase the best double split loom tubing? Here are some advices and extra details helping you to make the best choice. The term “electrical conduit” refers to durable tubing or other types of enclosure used to protect and provide a route for individual electrical wiring conductors. Conduit is typically required where wiring is exposed or where it might be subject to damage. A conduit can be made of metal or plastic and may be rigid or flexible. All conduit is installed with compatible fittings (couplings, elbows, connectors) and electrical boxes, usually made of the same or similar material. Conduit must be installed in accordance with the National Electrical Code (NEC) and all applicable local code rules.
Electrical metallic tubing, or EMT, is the most common type of conduit for exposed interior installations, such as in a basement or an unfinished garage or workshop. It is the lightest and thinnest of the rigid metal conduit types and comes in a few different diameters; 1/2-inch is the most standard size for household circuits. EMT is also called “thin-wall” and is relatively easy to bend with a tool called a conduit bender. EMT is permitted by the National Electrical Code (NEC) for dry and wet locations but requires special watertight fittings and connectors in wet locations. With proper installation, EMT raceway can serve as a circuit ground path and be used in place of a separate ground wire running inside the conduit.
Intermediate Metallic Conduit or IMC is lighter weight, metallic conduit and is rated as stronger than other rigid conduit. IMC was first produced by Allied Tube & Conduit. IMC, provided in both threaded IMC and non-threaded IMC forms, is a rigid metallic conduit tubing, typically hot-dipped galvanized steel or stainless steel. The interior of galvanized steel IMC is usually coated with an anti-corrosion layer. Threaded IMC is joined by threaded couplings, C condulets, sweeps and bends. The tubing is cut with a pipe cutter or tubing cutter, and then threads cut using a thread cutting tool. When cutting IMC, take care to remove burrs on the tubing interior that would otherwise damage electrical wires being pulled through the conduit. Read extra information on flexible plastic conduit.
The flexible metallic tubing (FMT) is made to give great flexibility and includes a metallic tube-like design. It really is very easy to route or shape to fit probably the most difficult areas. That is why it is great to utilize on the do-it-yourself projects where it is much better to not join multiple components of Stainless Steel Flexible Conduit together. Also, this kind of tubing does not feature any form of waterproof protection.
When choosing your conduit cable it’s important that you choose the correct material for the project you are undertaking, this is to ensure the safety of yourself and others, also to promote high performance of the tubing. Typical conduit materials that you will find from RS Components are nylon, steel, galvanised steel, PVC and stainless steel amongst a whole host of others.
CorrugatedConduit.com is a leading supplier of flexible conduit located in Kowloon, China. We have 15 years cooperating qualified manufacturer in mainland. Because of our good quality control management and large volume we are able to sell you the best flexible conduit at competitive prices. Discover additional information at https://corrugatedconduit.com/.